User Manual

2-6
Installing the Access Point
Installation Procedures
Installing the Access Point
3. In User Name, type admin.
4. In Password, type password. The Web interface appears, showing the
Information page.
5. On the menu, click Basic Settings.
6. Configure the IP address settings.
• (Recommended) If you want to assign a fixed IP address to the access
point, select Disable in DHCP Client, and then enter the IP Address,
IP Subnet Mask, and Default Gateway that you want to assign to it.
These settings must be compatible with your network to ensure that
the access point can communicate with other network devices.
• If you have a DHCP server on the network and you want the access
point to automatically obtain an IP address from the DHCP server,
click Enable in DHCP Client. You do not have to configure other
settings, but you will need to check the DHCP server periodically to
determine the IP address that the access point is using.
7. (Applicable to Access Point 10ag WW only) In Country/Region, select
the country where you are operating the access point. Available options
include:
• None (default)
•Africa
• China
•Australia
• Canada
•Germany
• Israel
• Japan
•Korea
• Mexico
• South America
•USA
Note ■ The Country/Region option is unavailable in Access Point 10ag NA. The
country is fixed to USA.
■ If you are using Access Point 10ag WW, you must select the correct
country/region for the location in which you operate the access point, so
that it uses the correct authorized radio channels for wireless network
devices.