User Manual
Table Of Contents
- Contents
- Introducing the ProCurve Wireless Access Point 10ag
- Installing the Access Point
- Before You Begin
- Installation Precautions
- Summary of Installation Tasks
- Installation Procedures
- Getting Started With Access Point Configuration
- Setting Up the Access Point
- Configuring Basic Settings
- Configuring Basic Wireless Settings
- Configuring the Security Settings
- Controlling Access to the Wireless Network
- Configuring Advanced Wireless Settings
- Setting the SNMP Community Names
- Managing the Access Point
- Troubleshooting
- Specifications
- Access Point Port and Network Cables
- Safety and EMC Regulatory Statements
- Open Source Licenses
- Recycle Statements
3-2
Getting Started With Access Point Configuration
Introducing the Management Web Interface
Getting Started With Access
Point Configuration
The Web browser that you will use for administration must have JavaScript
enabled to support the interactive features of the Web interface. It must also
support HTTP uploads to use the firmware upgrade feature.
Note To ensure proper screen refresh when using Internet Explorer with Windows
XP, be sure that the browser options are configured as follows: Under the
menu “Tools > Internet Options > Temporary Internet Files > Settings,”
the setting for item “Check for newer versions of stored pages” should be
set to“Automatically.”
s
Logging On to the Web Interface
To log on to the Web interface:
1. Start your Web browser.
2. In the address or location bar, enter the IP address that you assigned to
the access point when you preconfigured it in “
Step 1. Preconfigure the
Access Point” on page 2-4.
A logon dialog box appears.
3. In User name, type admin.
4. In Password, type password.
5. Click OK to log on.
The ProCurve Access Point 10ag Web interface appears, showing the Infor-
mation page.