User Manual

4-20
Setting Up the Access Point
Configuring the Security Settings
Setting Up the Access Point
Configuring WPA2 (AES)
This security profile uses AES as the encryption cipher and 802.1X as the
authentication mechanism. In this way, each station is assigned a unique
master key to derive the encryption between the access point and station, and
the encryption keys can be automatically and periodically changed to further
reduce the possibility of their discovery.
Figure 4-11. WPA2 (AES) Options
To use WPA2 (AES):
1. On the menu, click Security Settings. The Security Settings page
appears.
2. In SSID, select the SSID for which you want to set the security profile.
3. In the Key Update Interval box, define the time interval (in seconds)
for regenerating a group key.
4. Under RADIUS Server, configure the RADIUS server settings:
• RADIUS Server IP: Type the IP address of the RADIUS server on
the network.
• RADIUS Port: Type the User Datagram Protocol (UDP) port number
used by the RADIUS server for accounting messages. Setting the port
number to zero disables RADIUS authentication.