User Manual
Table Of Contents
- Contents
- Introducing the ProCurve Wireless Access Point 10ag
- Installing the Access Point
- Before You Begin
- Installation Precautions
- Summary of Installation Tasks
- Installation Procedures
- Getting Started With Access Point Configuration
- Setting Up the Access Point
- Configuring Basic Settings
- Configuring Basic Wireless Settings
- Configuring the Security Settings
- Controlling Access to the Wireless Network
- Configuring Advanced Wireless Settings
- Setting the SNMP Community Names
- Managing the Access Point
- Troubleshooting
- Specifications
- Access Point Port and Network Cables
- Safety and EMC Regulatory Statements
- Open Source Licenses
- Recycle Statements
4-25
Setting Up the Access Point
Configuring Advanced Wireless Settings
Setting Up the Access Point
Setting Up Remote MAC Authentication
Configuring Advanced Wireless Settings
Advanced wireless settings include options for enabling and disabling the
wireless radios and Wi-Fi Multimedia (WMM). Options for fine tuning the
access point’s radio operation are also available.
Figure 4-14. Advanced Wireless Settings Page
To configure the advanced wireless settings:
1. On the menu, click Wireless Settings under Advanced Settings.
2. In SSID, select the SSID for which you want configure the advanced
wireless settings.
3. In WMM Support, click Enable if you want the access point to prioritize
certain types of traffic above other traffic. When enabled, WiFi Multimedia
(WMM) provides basic Quality of Service (QoS) to wireless network. HP
recommends enabling this option if your network requires prioritization
for voice or video traffic (for example, if network users use Voice over IP
applications).