User Manual
Table Of Contents
- Contents
- Introducing the ProCurve Wireless Access Point 10ag
- Installing the Access Point
- Before You Begin
- Installation Precautions
- Summary of Installation Tasks
- Installation Procedures
- Getting Started With Access Point Configuration
- Setting Up the Access Point
- Configuring Basic Settings
- Configuring Basic Wireless Settings
- Configuring the Security Settings
- Controlling Access to the Wireless Network
- Configuring Advanced Wireless Settings
- Setting the SNMP Community Names
- Managing the Access Point
- Troubleshooting
- Specifications
- Access Point Port and Network Cables
- Safety and EMC Regulatory Statements
- Open Source Licenses
- Recycle Statements
5-3
Managing the Access Point
Changing the Management Password
Managing the Access Point
• Mode: Shows the wireless mode in use, either g/b (802.11gb) or a
(802.11a)
• Channel: Shows the wireless channel on which the access point is
broadcasting signal.
• Security Type: Shows the security profile assigned to this wireless
interface.
Changing the Management Password
Management access to the Web interface is controlled through an adminis-
trator password. To prevent unauthorized users from accessing the Web
interface and modifying the Access Point's settings, the interface is password-
protected.
The default manager user name is admin and the default password is password.
C a u t i o n HP strongly recommends that you change the default Web interface password
immediately after your first logon. This will help prevent unauthorized users
from logging on to the Web interface and changing the access point settings
to compromise your network.