User's Manual
Table Of Contents
- Contents
- 1 Deploying the M220
- 2 Using Quick setup
- 3 Managing the M220
- 4 Working with wireless communities and authentication
- 5 Wireless configuration
- 6 Creating WDS links
- 7 Configuring Ethernet, IP, and VLAN settings
- 8 Clustering multiple M220s
- 9 Maintenance
- 10 Tools
- 11 Support and other resources
Quick setup wizard 13
See also the HP M220 802.11n Access Point Quickstart, which describes the configuration
procedure for a basic wireless network.
Quick setup wizard
To the Quick setup wizard, select one of the following options for the network environment, as
described in the previous sections, and select OK:
• Basic wireless network
• Multiple wireless networks
• Multiple wireless networks with wired VLANs
• Multiple wireless networks with RADIUS authentication
• Add to wireless network with existing AP cluster
Step 1: Specify access point settings
For a complete description of all settings, see the online help.
Configure the radio
Wireless mode
Select a radio mode.
• IEEE 802.11a: Up to 54 Mbps in the 5 GHz frequency band.
• IEEE 802.11b/g: (Compatibility mode.) Up to 11 Mbps for 802.11b and 54 Mbps for
802.11g in the 2.4 GHz frequency band.
• IEEE 802.11a/n: (Compatibility mode.) Up to 300 Mbps for 802.11n and 54 Mbps for
802.11a in the 5 GHz frequency band.
• IEEE 802.11b/g/n: (Compatibility mode.) Up to 11 Mbps for 802.11b, 54 Mbps for
802.11g, and 300 Mbps for 802.11n in the 2.4 GHz frequency band. If support for
802.11b/g is not required, it is recommended that you choose one of the 802.11n-only
modes.