User's Manual
Table Of Contents
- Contents
- 1 Deploying the M220
- 2 Using Quick setup
- 3 Managing the M220
- 4 Working with wireless communities and authentication
- 5 Wireless configuration
- 6 Creating WDS links
- 7 Configuring Ethernet, IP, and VLAN settings
- 8 Clustering multiple M220s
- 9 Maintenance
- 10 Tools
- 11 Support and other resources
WDS configuration 67
WDS configuration
To view or add a WDS link, select Wireless > WDS.
General
Local address
Shows the MAC address of the wireless port on the M220. This address needs to be entered
on the M220 to which this link will connect.
Spanning tree mode
The Spanning-Tree Protocol (STP) can be enabled to prevent undesirable loops from occurring
in the network that may result in decreased throughput. Enabling spanning tree is
recommended.