User's Manual
Table Of Contents
- Contents
- 1 Deploying the M220
- 2 Using Quick setup
- 3 Managing the M220
- 4 Working with wireless communities and authentication
- 5 Wireless configuration
- 6 Creating WDS links
- 7 Configuring Ethernet, IP, and VLAN settings
- 8 Clustering multiple M220s
- 9 Maintenance
- 10 Tools
- 11 Support and other resources
Sample WDS deployment 71
13. S e l e c t Wireless > WDS.
14 . U n d e r WDS Link 1, configure the following settings:
• Set Remote address to the MAC address of M220 #2.
• Set Encryption to WPA (PSK).
• Set Link name to the same value you entered for the first M220 (M220_WDS1).
• Set Key to a39xm210.
15. S e l e c t Save.
D.Test the link and make performance adjustments
The WDS link should now be active.
1. S e l e c t Tools > Ping on M220 #1 and ping the address of M220 #2 (192.168.5.20). If
the ping succeeds, it means that the WDS link is working.
2. To view the operational status and traffic statistics for the WDS interface on either M220,
select Status > Ports.