User's Manual
Table Of Contents
- Product basics
- Use the scanner
- Care and maintenance
- Troubleshooting
- Basic troubleshooting tips
- Scanner installation troubleshooting
- Scanner initialization or hardware problems
- Scanner operation problems
- Scanner will not turn on
- Scanner keeps turning off
- Scanner does not scan right away
- Scanner scans only one side of a two-sided page
- Scanned pages are missing at the scan destination
- Scanned image is fuzzy
- Scanned pages are out of order at the scan destination
- Optimize scanning and task speeds
- The scan is completely black or completely white
- Scanned images are not straight
- Vertical white stripes appear on the printed page
- Vertical colored stripes appear on the printed page
- Scan files are too large
- Scanner buttons are not working correctly
- Scanner paper path problems
- Paper jamming, skewing, misfeeds, or multiple-page feeds
- Scanning fragile originals
- Paper does not feed from the scanner
- Originals are curling up in the scanner output tray.
- The bottom of the scanned image is cut off
- The scanned images have streaks or scratches
- An item loaded in the scanner jams repeatedly
- Clear jams from the scanner paper path
- Product accessibility
- Specifications and warranty
- Scanner specifications
- Document feeder specifications
- Environmental specifications
- Disposal of Waste Equipment by Users
- Electronic hardware recycling
- Chemical substances
- Regulatory information
- Energy information
- Important safety instructions
- Restriction on hazardous substance (Turkey)
- Restriction on hazardous substance (Ukraine)
- Recycle and restricted material information
- Hewlett-Packard limited warranty statement
- Index
7. If streaks still appear, repeat steps 3 through 6.
The cleaning cloth can be cycled through the scanner up to five times within 30 minutes. After
that, the cloth will dry out. If repeated cycling of the cleaning cloth does not remove the streaks
from the scanned images, clean the rollers.
8. Windows: Under Record Cleaning Paper Path, click Record Cleaning to log this cleaning
activity and update the paper path cleaning history.
Clean the rollers
Clean the rollers under the following conditions:
●
Windows: The HP Scanner Tools Utility indicates that cleaning is needed.
●
You experience repeated document jams.
●
The document feeder does not pull pages into the paper path.
●
The scanned images are elongated.
● You frequently scan any of the following types of documents: coated paper, chemically treated
documents such as carbonless paper, documents with a large amount of calcium carbonate,
documents written with or written on with pencil, documents on which the toner has not fused.
To clean the rollers, follow these steps:
1. Press the Power (
) button to turn off the scanner, and then disconnect the USB cable and
power supply from the scanner.
2. Pull forward on the document feeder latch to open the document feeder hatch.
24 Chapter 3 Care and maintenance ENWW