User's Manual
Table Of Contents
- Product basics
- Use the scanner
- Care and maintenance
- Troubleshooting
- Basic troubleshooting tips
- Scanner installation troubleshooting
- Scanner initialization or hardware problems
- Scanner operation problems
- Scanner will not turn on
- Scanner keeps turning off
- Scanner does not scan right away
- Scanner scans only one side of a two-sided page
- Scanned pages are missing at the scan destination
- Scanned image is fuzzy
- Scanned pages are out of order at the scan destination
- Optimize scanning and task speeds
- The scan is completely black or completely white
- Scanned images are not straight
- Vertical white stripes appear on the printed page
- Vertical colored stripes appear on the printed page
- Scan files are too large
- Scanner buttons are not working correctly
- Scanner paper path problems
- Paper jamming, skewing, misfeeds, or multiple-page feeds
- Scanning fragile originals
- Paper does not feed from the scanner
- Originals are curling up in the scanner output tray.
- The bottom of the scanned image is cut off
- The scanned images have streaks or scratches
- An item loaded in the scanner jams repeatedly
- Clear jams from the scanner paper path
- Product accessibility
- Specifications and warranty
- Scanner specifications
- Document feeder specifications
- Environmental specifications
- Disposal of Waste Equipment by Users
- Electronic hardware recycling
- Chemical substances
- Regulatory information
- Energy information
- Important safety instructions
- Restriction on hazardous substance (Turkey)
- Restriction on hazardous substance (Ukraine)
- Recycle and restricted material information
- Hewlett-Packard limited warranty statement
- Index
Basic troubleshooting tips
Simple issues such as smudges on the scanning strips or loose cables can cause your scanner to
produce fuzzy scans, operate in an unexpected manner, or fail to operate. Always check the following
items when you encounter scanning problems.
●
If scans are fuzzy, check to see if the scanning strips inside the document feeder are dirty or
smudged. If so, clean the scanning strips.
If you are scanning a document that will be analyzed using Optical Character Recognition
(OCR), make sure that the original document is clear enough to be analyzed.
●
Make sure that the USB and power cables are firmly seated in their respective connectors on the
back of the scanner, and that the power cord is plugged into a working electrical outlet or surge
protector.
●
Make sure the scanner has not automatically powered off. If it has, press the Power (
) button
to turn on the scanner.
TIP: You can change the auto-off setting using HP Scanner Tools Utility (Windows) or
HP Utility (Mac).
● Ensure that the scanner is receiving power.
◦ Check that the green LED on the power supply case is on.
◦
If the green LED is not on, ensure that power is available to the power outlet or surge
protector that the power supply is plugged into.
◦ If power is available to the power outlet or surge protector but the green LED is still not on,
the power supply might be defective. Contact
www.hp.com/support for assistance.
●
If you receive a Scanner not found message on your computer when trying to use the scanner,
turn off the scanner, wait 30 seconds, and then turn on the scanner. If you still receive this
message, you might need to reset the scanner.
● If you have connected the scanner to the computer through a USB hub or through a USB port on
the front of the computer, disconnect the scanner and then reconnect it to a USB port on the
back of the computer.
●
Windows: Make sure that the Scan (
) button is enabled (see “Product accessibility” for more
information).
●
Turn off the scanner, wait 30 seconds, and then turn on the scanner.
●
Make sure the document feeder hatch is closed.
●
Restart the computer.
If you continue to have problems, it is possible that your HP scanning software, firmware, or
associated drivers are out of date or have become corrupted. See
www.hp.com/support to locate
software, firmware, and driver updates for your scanner.
ENWW
Basic troubleshooting tips
29