HP Scanjet Professional 3000 Getting Started Guide
Copyright and license © 2009 Copyright Hewlett-Packard Development Company, L.P. Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
Contents 1 Scanner setup ....................................................................................................................2 English Check the box contents ......................................................................................................2 Install the software ..............................................................................................................2 Set up the hardware ................................................................................
1 Scanner setup Follow these steps to set up the scanner. Check the box contents Unpack the scanner hardware. Be sure to remove any shipping tape. NOTE: The contents of the box, including the number of scanning software CDs, can vary by country/region.
1. 2. 3. Decide what software to install. • If you will be using the scanner with document-management and scanning software that you already own, you only need to install the HP Scanjet Driver. • If you do not already have document-management and scanning software, you can use the software that is shipped with the scanner. Read the onscreen descriptions of the software during the installation to decide what software to install.
Connect the USB cable CAUTION: Be sure you install the HP scanning software before connecting the scanner to your computer with the USB cable. See “Install the software” on page 2. Use the USB cable that came with the scanner to connect the scanner to the computer. Connect the square end of the cable to the scanner and the rectangular end of the cable to the computer. NOTE: HP recommends using a USB port on the back of the computer for a more reliable connection to the scanner.
2. 3. Adjust the paper guides in the document feeder so they touch both sides of the page. Ensure that the page is straight and the guides are against the edges of the page. Start the scan. • If you have installed the HP Scanjet scanner driver, press the Scan button. The page will feed through the scanner. The Scan Progress Window will appear on your computer screen and the scanned image will be saved in a default location or a user defined location.
2 Product care and support This section describes the options for product support. User Guide The scanner User Guide is the primary source for scanner information. It provides information about using, maintaining, and troubleshooting the scanner. To open the User Guide, click Start, point to Programs or All Programs, point to HP, point to Scanjet, point to 3000, and then click User Guide. If your software is not installed yet, insert the HP CD and click the View or Print Guides button.
3 Specifications and warranty This section contains product specifications and warranty information for your scanner. Scanner specifications For detailed scanner and paper specifications, see the scanner User Guide. Environmental specifications For environmental specifications, see the scanner User Guide. Hewlett-Packard limited warranty statement HP Scanjet 3000 scanner Model Asia/Pacific Americas Europe/Middle East/ Africa 3000 1 year 1 year 1 year 1.
7. WRITTEN OR ORAL, IS EXPRESSED OR IMPLIED, AND HP SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, AND FITNESS FOR A PARTICULAR PURPOSE. Some countries/regions, states, or provinces do not allow limitations on the duration of an implied warranty, so the above limitation or exclusion might not apply to you.
© 2008 Hewlett-Packard Development Company, L.P. www.hp.
