User's Manual
Table Of Contents
- Contents
- Use your Opal for printing
- Use your Opal with your computer
- Install the software
- General Windows Bluetooth information
- Basic operations
- Configure Bluetooth
- Security
- Troubleshooting
- Technical information
- Technical specifications
- Limited warranty statement
- Customer care
- Environmental product stewardship program
- Regulatory Information
- Notice to users in the European Economic Area
- Notice to users in Argentina
- Notice to users in Brazil
- Notice to users in Indonesia
- Notice to users in Japan
- Notice to users in Korea
- Notice to users in Mexico
- Notice to users in Pakistan
- Taiwan DGT warning statement
- Notice to users in Taiwan
- Notice to users in Russia
- Notice to users in South Africa
- Declaration of conformity (European Economic Area)
- Index
Hardware settings
The Hardware tab of the Bluetooth Configuration Panel provides basic information about
the Bluetooth hardware installed on this computer and access to the Advanced Settings
dialog box, if required:
• Devices:
• Name: The name of the device, e.g., My Bluetooth Device.
• Type: The type of device, e.g., USB.
• Device Properties:
• Device status: Indicates that the device is operating properly or that there is a
problem/conflict.
• Manufacturer: The name of the company that manufactured the device selected
in the Devices section of this dialog box.
• Firmware Revision: The manufacturer's firmware version number.
• Device Address: The Bluetooth Device Address (BDA or BD_Addr) assigned to
this device when it was manufactured.
• HCI Version: The version number of the Bluetooth Specification that the Host
Controller Interface complies with.
• HCI Revision: The revision number of the Bluetooth Specification that the Host
Controller Interface complies with.
• LMP Version: The version number of the Bluetooth Specification that the Link
Manager Protocol complies with.
• LMP Sub Version: The sub-version number of the Bluetooth Specification that the
Link Manager Protocol complies with.
• Retest Button: Queries the hardware device selected in Devices, and updates the
data displayed in Device Properties.
• Advanced button: Displays the Advanced Settings dialog box, which allows you to
select the country code and transmission power settings. This option is not available
on all systems.
Advanced Settings
When available, this dialog box is reached from the Hardware tab of the Bluetooth
Configuration Panel.
NOTE: Depending on the country/region in which the hardware is sold and/or in
which it will be used, the Advanced button may not be present.
From this dialog box you can set the:
• Country Code
• North America, Europe (except France), and Japan
• France and China
• Maximum Transmission Power
•High
•Medium
•Low
Configure Bluetooth 41