User's Manual
Table Of Contents
- Contents
- Use your Opal for printing
- Use your Opal with your computer
- Install the software
- General Windows Bluetooth information
- Basic operations
- Configure Bluetooth
- Security
- Troubleshooting
- Technical information
- Technical specifications
- Limited warranty statement
- Customer care
- Environmental product stewardship program
- Regulatory Information
- Notice to users in the European Economic Area
- Notice to users in Argentina
- Notice to users in Brazil
- Notice to users in Indonesia
- Notice to users in Japan
- Notice to users in Korea
- Notice to users in Mexico
- Notice to users in Pakistan
- Taiwan DGT warning statement
- Notice to users in Taiwan
- Notice to users in Russia
- Notice to users in South Africa
- Declaration of conformity (European Economic Area)
- Index
Accessibility mode
There are two available Accessibility modes for your printer. Follow the instructions in
your device user guide to change the Accessibility mode.
• Visible to all (public/shown to all) (default)
When the printer's Accessibility setting is set to “Visible to all”, any Bluetooth device
within range can discover and use the printer. This is the default setting for your
Bluetooth adapter.
• Not visible (private/hidden)
When the Accessibility setting is set to “Not visible”, only sending devices that have
stored the printer's Bluetooth device address can discover and use the printer.
Opaldevice address
Bluetooth devices have a unique device address that cannot be changed.
The following are general instructions for finding your printer or all-in-one's Bluetooth
device address. Consult the documentation for your printer or all-in-one for specific
instructions.
1. Access the control panel menu and select the Opal option.
2. Select Device address and press OK to display the Bluetooth adapter device
address.
Security level
• Low (default)
When the printer's security level is set to “Low”, the printer does not require a Passkey
code. Any Bluetooth device may print to it.
• High
When the printer's security level is set to “High”, you must enter the Passkey code in
the sending device in order to print.
Passkey/PIN code
When the printer's Bluetooth security level is set to High, the sending device attempting
to print is prompted for a Passkey. The Passkey is a 4-digit code that is set on the printer.
The default Passkey is 0000.
The following are general instructions for finding your printer or all-in-one's Bluetooth
passkey. Consult the documentation for your printer or all-in-one for specific instructions.
1. Access the control panel menu and select the Bluetooth option.
2. Select Passkey and press OK to display the printer's Passkey.
You can also change the Passkey from this menu.
Print from your Bluetooth device
This chapter contains sections on printing from different Bluetooth devices.
Print from your Bluetooth device 7