HP 3201nw Wireless G USB Print Server + 4port Switch HP 無線 USB 列印伺服器 (含 4 個連接埠) SDCAB-0803 HP User Guide
© Copyright 2008 Hewlett-Packard Development Company, L.P. Hewlett-Packard Company notices The information contained in this document is subject to change without notice. All rights reserved. Reproduction, adaptation, or translation of this material is prohibited without prior written permission of Hewlett-Packard, except as allowed under copyright laws. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.
Product Overview Chapter 1 Wall-Mounting Placement Follow these instructions: The Router has four wall-mount slots on its back panel. The distance between two adjacent slots is 152 mm (6 inches). 1. Determine where you want to mount the Router. Make sure that the wall you use is smooth, flat, dry, and sturdy. Also make sure the location is within reach of an electrical outlet. Two screws are needed to mount the Router. 2. Drill two holes into the wall. Make sure the holes are 152 mm (6 inches) apart.
Contents 1 Welcome 2 Set up your print server Attach wirelessly to an existing wireless network . . . . . . . . . . . Attach using Ethernet to an existing wireless router . . . . . . . . . . Attach using Ethernet to an existing router (not wireless) . . . . . . Use your print server to share printers and computers without an ............ ............ ............ existing network .. .. .. .. .... .... .... .... .... .... .... .... ... ... ... ... ... ... ... ... ........ ........ ........ ........
Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 Welcome Congratulations on the purchase of your Wireless G USB Print Server. The Print Server was designed to provide a simple and efficient wireless solution for connecting to your HP printer or all-in-one. With supported HP printers, you can print using the print server and with All-in-One devices you can print, scan, and fax (if your device has fax capability). Welcome Contents of the package The Wireless Print Server includes the following items.
Lights and ports of the print server 1 2 3 Power light (green) Wireless light (blue) Attention light (amber) 4 5 6 Power connector 2 USB ports 4 Ethernet ports The meanings of the patterns of the lights are as follows.
Set up your print server Set up your print server 2 2 If you misplace your Setup Guide, you can use these instructions to initially set up your print server. During the initial installation you will make a temporary connection between the print server and the computer using the setup cable. Attach wirelessly to an existing wireless network If you already have a wireless network, use these instructions to connect your print server wirelessly to the wireless network.
Attach using Ethernet to an existing wireless router If you already have a wireless network, use these instructions to connect your print server using Ethernet to the wireless router.
If you have a wired router, use these instructions to connect your print server using Ethernet and set up your print server as a wireless access point.
Use your print server to share printers and computers without an existing network You can use your print server to share printers and computers even if you do not already have a network. IMPORTANT: Using your print server in this fashion will not allow you to connect to the Internet. Connecting to the Internet requires a router to be connected to your modem.
3 Using the Print Server For most everyday tasks, you will use your printer or all-in-one device just like you always have. Occasionally you may want to use the Connection Manager or Advanced Setup utility. Use the Connection Manager You can use the Connection Manager to perform the following tasks. • • • • Check the status. Change printers. Access the Print Queue. Connect or Disconnect. Access the Connection Manager Windows Right-click the icon in the System Tray. Mac Click the icon in the Dock.
Mac 1. 2. 3. Open the Connection Manager. Select Select Printer from the Information and Settings pop-up menu. Select a different printer and click Select. Restart the Connection Manager If the icon does not appear, you need to restart the Connection Manager. Windows S Go to Start --> All Programs --> HP Wireless Print Server--> Restart connection manager. Mac S 12 Go to Applications: HP Print Server and double-click Connection Manager.
Use Advanced Setup The Advanced Setup screen allows you to discover your IP and Mac addresses and, if necessary for your network, manually change the IP address. Windows 1 2 3 4. Go to Start --> All Programs --> HP USB print server--> Advanced Setup The IP and MAC addresses of all print servers on your network will display. Select the print server and click Next. The IP Address Setting screen will display. Choose one of the following. a.
14 Using the Print Server
4 Troubleshooting Cannot detect print server during installation. Cause Either the printer or print server has no power or a cable is unplugged. Solution Check the power cords and cables between the devices and the network. Cause In a corporate environment, the firewall may be configured to never allow access and may not give any messages. Solution Consult with your IT department and ask them to grant access to the print server. Cause Your print server is on a different subnet.
Solution Check the Print Server icon. If it does not have a green checkmark, then the connection has been lost. Try the following. • • Reconnect to the printer. If that does not work after a minute or so, then try exiting the Connection Manager and starting it again. See “Use the Connection Manager” on page 11. Cause Printer software is very old or not completely installed. Solution 1. 2. Verify that you can print using a USB cable. Download the latest printer driver from www.hp.
5 Technical information This chapter contains technical information, regulatory information, and environmental information about your print server. Specifications General Antenna • • • • 802.11 b/g Printer Adapter: USB 1.1 Security • • • WEP WPA-PSK WPA2-PSK Power Consumption Dipole anntena Peak Gain: 1.8 dB Environmental • • • • Operating Temperature: 0° C – 40° C Storage Temperature: –20° C – 70° C Operating Humidity: 10 – 85% RH Storage Humidity: 5 – 90% RH 3.
Limited warranty statement A. Extent of Limited Warranty 1 Hewlett-Packard (“HP”) warrants to the end-user customer (“Customer”) that each HP accessory product (“Product”) shall be free from defects in material and workmanship for twelve months after the date of purchase. 2 For each software Product, HP’s limited warranty applies only to a failure to execute programming instructions. HP does not warrant that the operation of any Product shall be uninterrupted or error free.
Disposal of Waste Equipment by Users in Private Households in the European Union Disposal of Waste Equipment by Users in Private Households in the European Union This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
Notice to users in Argentina CNC xxxxxx Notice to users in Germany Geräuschemission LpA < 70 dB am Arbeitsplatz im Normalbetrieb nach DIN 45635 T.
Notice to users in Russia Notice to users in Singapore Complies with IDA Standards DB100427 Notice to users in South Africa TA-2007/683 APPROVED Technical information Notice to users in Taiwan Wireless regulatory information This section contains regulatory information pertaining to wireless products.
Notice to users in Canada For Indoor Use. This digital apparatus does not exceed the Class B limits for radio noise emissions from the digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. The internal wireless radio complies with RSS 210 and RSS GEN of Industry Canada.
European Union Regulatory Notice Products bearing the CE marking comply with the following EU Directives: Low Voltage Directive 2006/95/EEC EMC Directive 2006/95/EEC CE compliance of this product is valid only if powered with the correct CE-marked AC adapter provided by HP.
Declaration of Conformity DECLARATION OF CONFORMITY according to ISO/IEC 17050-1 and EN 17050-1 Supplier's Name: Supplier's Address: Do C # : S DCA B -0 8 0 1 -0 1 Hewlett-Packard Company 8000 Foothills Blvd., Roseville CA 95747-5731 declares, that the product 2) Product Name and Model: 1) Regulatory Model Number: Product Options: Conforms to the following Product Q6301A/Q6302A Windows G Network Server SDCAB-0801 All Specifications and Regulations: EMC: Class B EN 301489-1 V1.4.1 EN 301489-17 V1.2.
