Safety and Regulatory Information HP 9000 rp8400 Server Third Edition Manufacturing Part Number : A6093-96023-en April 2005 © Copyright 2005
Legal Notices © Copyright 2005 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Revision History First Edition Online only. A6093-960xx.
Safety and Regulatory Information Notational Conventions 1 Safety and Regulatory Information For your protection, this product has been tested to various national and international regulations and standards. The scope of this regulatory testing includes electrical/mechanical safety, radio frequency interference, acoustics, and known hazardous materials. Where applicable, approvals obtained from third-party test agencies are shown on the product label.
Safety and Regulatory Information Japanese Radio Frequency Interference (VCCI) Japanese Radio Frequency Interference (VCCI) This equipment is in the Class A category information technology equipment based on the rules of Voluntary Control Council For Interference by Information Technology Equipment (VCCI). When used in a residential area, radio interference may be caused. In this case, user may be required to take appropriate corrective actions.
Safety and Regulatory Information Australian C-Tick Label Australian C-Tick Label Figure 1-1 Australian C-Tick Label BSMI (Taiwan) This product is fully compliant to CNS 13438 (CISPR 22: 1993) Class A. Battery Warning (Taiwan) The Taiwan EPA requires dry battery manufacturing or importing firms in accordance with Article 15 of the Waste Disposal Act are required to indicate the recovery marks on the batteries used in sales, giveaway or promotion.
Safety and Regulatory Information IT Power System IT Power System To ensure safe operation of this equipment, connect only to an AC power source that contains a protective earthing (PE) conductor. IT Power Systems do not provide adequate grounding and are not recommended. TT, TN-C, and TN-C-S Power Systems These products should not be connected to power systems that switch open the return lead when the return lead also functions as the protective earth (PE).
Safety and Regulatory Information Lithium Battery Caution Lithium Battery Caution WARNING Observe the correct polarity when changing the lithium battery. There is a danger of explosion if battery is installed incorrectly. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions and local disposal requirements. IMPORTANT Switzerland: Annex 4.10 of SR 814.013 applies to batteries.
Safety and Regulatory Information Laser Safety Declaration of Conformity English-8 Chapter 1
