Maintenance and Service Guide
Table Of Contents
- Product description
- External component identification
- Illustrated parts catalog
- Removal and replacement procedures preliminary requirements
- Backing up and recovering your data
- Tablet specifications
- Power cord set requirements
- Recycling
- Index
Remove the system board:
1. Disconnect the following cables from the system board:
(1) Speaker cable
(2) USB cable
(3) X-axis control cable
(4) Y-axis control cable
2.
Remove the six Phillips PM1.75×4.0 screws that secure the system board to the display assembly.
3. Lift the right side (1) of the system board until it rests at an angle.
Removal and replacement procedures
19