Maintenance and Service Guide
Table Of Contents
- Product description
- External component identification
- Illustrated parts catalog
- Removal and replacement procedures preliminary requirements
- Backing up and recovering your data
- Tablet specifications
- Power cord set requirements
- Recycling
- Index
Webcam
Description Spare part number
Front-facing webcam 727667-001
Rear-facing webcam (includes cable) 731533-001
Before removing the webcams, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the rear cover (see
Rear cover on page 14).
5. Remove the battery (see
Battery on page 16).
6. Remove the system board (see
System board on page 18).
Remove the rear-facing webcam:
1. Disconnect the rear-facing webcam cable (1) from the system board.
2. Release the rear-facing webcam (2) from the opening in the system board.
3. Remove the rear-facing webcam.
Remove the front-facing webcam:
1. Turn the system board upside down with the front toward you.
Removal and replacement procedures
21