Maintenance and Service Guide
Table Of Contents
- Product description
- External component identification
- Illustrated parts catalog
- Removal and replacement preliminary requirements
- Specifications
- Backing up and recovering your data
- Power cord set requirements
- Recycling
- Index
2. Insert a thin, plastic tool (2) under the left side of the wireless antenna transceiver and detach the
transceiver (3) from the display panel assembly. (The wireless antenna transceiver is attached to
the display panel assembly with double-sided adhesive.)
3. Disconnect the GPS antenna cable (1) from the system board.
NOTE: The GPS antenna cable must be unsoldered from the system board.
Removal and replacement procedures
19