Installation Manual

Smart Array Offline Firmware Update Utility

Version 2.09.10.02

********************************************************************************

Seg Bus Dev Func Description Version Build

1 55 0 0 HP Smart Array P812 3.22 0

External Enclosures Connected :

Index Description Version

2 MDS600 2.62

3 MDS600 2.62

4 P812 INT EXP 3.02

1 71 0 0 HP Smart Array P411 3.22 0

External Enclosures Connected :

Index Description Version

0 MSA60 2.18

1 MSA70 2.18

2 MSA60 2.18

3 MSA70 2.18

1 C7 0 0 HP Smart Array P812 3.22 0

External Enclosures Connected :

Index Description Version

2 D2700 SAS AJ941A 0052

3 D2600 SAS AJ940A 0052

4 P812 INT EXP 3.02

1 E4 0 0 HP Smart Array P411 3.22 0

External Enclosures Connected :

Index Description Version

0 MDS600 2.62

In this example, the system contains two Smart Array P411 Controllers. The first is at segment

1, bus 71, device 0, function 0. The second is at segment 1, bus E4, device 0, function 0.

Both controllers are running firmware version 3.22.

3. Compare the installed firmware version to the minimum recommended firmware version found

in the HP Smart Array RAID Controllers Support Matrix at:

http://www.hp.com/go/smart-array-raid-docs

If the controller firmware meets the minimum recommended version, no further action is

necessary.

Downloading the firmware update

To locate and download firmware for the Smart Array P411/256 Controller, follow these steps:

1. Go to the Business Support Center, at:

http://www.hp.com/go/bizsupport

2. Search for “Smart Array P411”.

3. In the “Narrow search using only” section, click Drivers and software.

4. Locate and click the link for the firmware download package.

5. Review the installation instructions and release notes on the download page.

6. Download the firmware.

7. Follow the procedures supplied with the update package to install the firmware update.

Verifying and updating controller firmware offline 15