Designjet SmartStream Trial Version Installation Guide
Edition 2 Legal notices Trademarks © 2014 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Microsoft® and Windows® are U.S. registered trademarks of Microsoft Corporation. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
Table of contents Installation ...................................................................................................................................................... 1 Requirements ........................................................................................................................................................ 1 How to install ................................................................................................................................................
iv ENWW
Installation Requirements Computer hardware and software ● Intel Core i3 2.4 GHz with 4 virtual cores/threads, or equivalent or better processor ● 4 GB of RAM, or more ● 3.
For documentation and other support, see http://www.hp.com/go/Z6600/support. ● HP Designjet Z6800 Photo Production printer For documentation and other support, see http://www.hp.com/go/Z6800/support. NOTE: HP Designjet SmartStream supports only PostScript printers. If your printer requires an accessory to handle PostScript, you must install the accessory to use the printer with HP Designjet SmartStream. For further up-to-date information, see http://www.hp.com/go/designjetsmartstream.
4. Once you are in the printer’s Embedded Web Server, select the Setup tab, then Firmware update. 5. If you have an HP Designjet T3500 Production eMFP, select the Manual firmware update tab. 6. Follow the instructions to upload the Print Controller license you just downloaded. 7. To check the licenses have been correctly installed, you can use the printer’s front panel to view general information about the printer (see the printer user’s guide).
4. Choose whether to participate in the Customer Involvement Program. The Customer Involvement Program allows HP to collect anonymous usage data from your product in order to improve the quality of the product. Fuller information about it is displayed automatically during installation. In the Welcome window, read the text, select your answer, and press the OK button. This window can be displayed at any time by pressing the Customer Involvement Program.
3. Click the Printers tab. 4. Click the Add Printer button. 5. Give the printer a name and enter its IP address, then press Continue. You can choose any name you like to assign to the printer; it will be used only in the printers pane. If you do not know the printer’s IP address, the printer’s own documentation will tell you how to find it. It is normally available from the Connectivity menu in the printer’s front panel.