User Manual

Table Of Contents
Audio control panel
Feature Description
1 Phone button: Handles an incoming call when the audio system and your mobile device are paired. For
more information, see Respond to calls from audio control panel on page 37.
2 Volume down button: Press or press and hold to decrease the audio system volume. When it reaches the
minimal volume, the audio system emits a tone.
3 Play/Pause : Plays or pauses the audio from the audio system. Mutes or unmutes the microphone during a
call.
4 Volume up button: Press or press and hold to increase the audio system volume. When it reaches the
maximum volume, the audio system emits a tone.
5 Bluetooth button:
Press to turn on Bluetooth. Press the button again to turn o Bluetooth.
If a Bluetooth device is connected, press and hold the button to set the audio system to be
discoverable again to allow pairing with another Bluetooth device. The audio system can be paired
with two Bluetooth devices at the same time.
Press and hold the button for about six seconds to disconnect from all devices and clear previous
pairings from the audio system memory.
Bluetooth button light:
O light—Bluetooth is o. The audio system is on standby if the power is on.
Blinking light—The audio system is attempting to connect to a device.
Solid on light—The audio system is connected to a paired device.
Dim light—There is a print job coming and the audio is paused temporarily.
36 Chapter 4 Use Bluetooth audio system ENWW
English