Maintenance and Service Guide: 8200 Elite Series Convertible Minitower, 8200 Elite Series Microtower, 8200 Elite Series Convertible Small Form Factor, 8200 Elite Series Convertible Ultra-slim Desktop, 6200 Pro Series Microtower

Rear Chassis Fan
Description Spare part number
Rear chassis fan 643908-001
The rear fan is mounted to the rear chassis wall and secured by four Phillips screws.
1. Prepare the computer for disassembly (
Preparation for Disassembly on page 73).
2. Remove the computer access panel (
Computer Access Panel on page 74).
3. Disconnect the fan control cable (1) from the red/brown system board labeled CHFAN2.
4. Remove the four screws (2) that secure the fan housing to the chassis.
5. Remove the fan from the chassis (3).
Figure 6-43 Removing the rear chassis fan
To install the fan, reverse the removal procedure. Be sure to orient the air flow out of the unit.
Rear Chassis Fan 111