Maintenance and Service Guide: 8200 Elite Series Convertible Minitower, 8200 Elite Series Microtower, 8200 Elite Series Convertible Small Form Factor, 8200 Elite Series Convertible Ultra-slim Desktop, 6200 Pro Series Microtower

Expansion Cards
Description Spare part number
nVidia Quadro NVS295 PCIe x16 graphics card, 256 MB 641462-001
nVidia Quadro NVS300 PCIe x16 graphics card, 512 MB 632486-001
nVidia GF405, DVI/VGA PCIe x16 graphics card, 512 MB 641732-001
ATI Radeon HD6350 PCIe x16 graphics card, 512 MB 637995-001
ATI Radeon HD6450 PCIe x16 graphics card, 512 MB 637996-001
ATI Radeon HD6570 PCIe x16 graphics card, 1 GB 637997-001
AMD FirePro 2270 PCIe x16 graphics card, 512 MB 637213-001
Intel PRO/1000CT NIC, includes bracket 635523-001
HP FireWire / IEEE 1394a PCIe x1 Card 637591-001
Serial port, PCI card 638815-001
Printer port, PCI card 638817-001
USB 3.0 port, PCIe x1 card 616610-001
eSATA port assembly, PCI card 645558-001
The 8200 Elite computer has one PCI expansion slot, one PCI Express x1 expansion slot, one PCI
Express x16 expansion slot, and one PCI Express x16 expansion slot that is downshifted to a x4 slot.
The 6200 Pro computer has one PCI expansion slot, two PCI Express x1 expansion slots, and one
PCI Express x16 expansion slot.
NOTE: You can install a PCI Express x1, x4, x8, or x16 expansion card in the PCI Express x16 slot.
For dual graphics card configurations, the first (primary) card must be installed in the PCI Express
x16 slot that is NOT downshifted to a x4 slot (8200 Elite models).
To remove, replace, or add an expansion card:
1. Prepare the computer for disassembly (
Preparation for Disassembly on page 125)
2. Remove the access panel (
Computer Access Panel on page 126)
3. Locate the correct vacant expansion socket on the system board and the corresponding
expansion slot on the back of the computer chassis.
134 Chapter 7 Removal and Replacement Procedures – Microtower (MT) Chassis