Owner's manual

Figure 17 Web features settings

7. If you made any changes, click OK to save them.

Powering on the VLS

To power up the VLS appliance:

1. Plug the nod e AC power cord into a power source if not already connected.

2. Press the Power button (see Figure 18).

Thefan will initiallybeloud, but willbecomequieter.

3. Wait for the system to beep twice. This indicates the appliance is online.

10986

Figure 18 Press power button

Conﬁguring the VLS

The im a ges shown in the following sections were captured on a Windows system using the Internet

Explorer browser. The screens might appear slightly different if you are using a different browser or

aUNIX-

based system.

HP StorageWorks 1000i Virtual Library System