Owner's manual

Figure 33 iSCSI Initiator Properti es
3. Copy the entire Initiator Node Name. Do not modify the name.
NOTE:
Be sure t
o
copy the entire Initiator N ode Name. If part of the name is missing, the device will not
be
recognized.
Close the iSCSI Initiator Settings window by clicking its OK button.
4. In the Create Virtual Device pane of the GUI, scroll d own u ntil you see Host Settings (Figure 34), then
paste the Initiator Node Name into the iSCSI Name box in Host Settings as shown in Figure 35.
Figure 34 Host Settings
46
Configuring the VLS1000i