Owner's manual

Relocating an a
ppliance
IMPORTANT:
To ensure preser vation of data on the VLS, do not turn off the appliance using the power button; instead,
usethe Shut Down option in theVLS GUI.
NOTE:
The following process presents associating devices and backup hosts using the Microsoft iSCSI Software
Initiator. The steps and screens may be different depending on the iSCSI solution on your system.
To shut down, move, then restore power to an appliance:
1. Make su re that none of the initiators (hosts) have active connections with the VLS.
For example, in the iSCSI Initiator Properties dialog box for the Microsoft initiator, you can check the
Targets tab to determine if there are any connections that may need to be terminated.
Figure 4
8
Connected targets
2. If any o
f
the targets in Figure 48 have the status Connected, there is a possibility that there is
an
acti
ve
session. T o find out if there are any active sessions, click on one of the targets that
is
connected and then click Details.
HP StorageWorks 1000i Virtual Library System
59