Owner's manual

Figure 49 Log off sessions
3. Click the box under Identifier, as shown in Figure 49.Click Log off.The system will attempt to log off
the
current target’s session. If there is currently activity on this session, you will get a message saying
“The session cannot be logged out since a device on that session is c urrently being used.” If you
receive this message, either wait until the activit y finishes or cancel the activity. Repeat steps and
Step 3 to log off all connected targets.
4. On the Support tab under Maintenance, click Shut Down/Restart.On the Shut Down/Restart
page
(see Figure 50), click Shut Down.
Figure 50 Shut Down/Restart page
5. When the confirmation message appears, click OK to continue.
60
Working with the VLS1000i