Owner's manual

Figure 52 Shut down and restart th e VL S
Powering off the VLS
WARNING!
To reduce t
he
risk of personal injury, electric shock, or damage to the equipment, remove the power
cord to rem
ove
power from the node before removing the access panel. The front panel Power button
does not
c
ompletely shut off system power. Portions of the power supply and some internal circuitry
remain active until AC power is removed.
To power down the appliance:
1. Verify that any backup or restore operation has completed and that the VLS is idle.
2. Open the VLS GUI and log in. See Opening a VLS GUI session from a web browser.
3. Initiate a shut down of the VLS by selecting the GUI’s Suppor t tab, selecting Shut Down/Restart,and
clicking Shut Down.See Figure 5 2.
4. Theappliancewillshutdown.
5. Unplug the node AC power cord from the power source if you will be removing the access panel.
The appliance is now without power.
62
Working with the VLS1000i