Owner's manual

• Number of Standalone Drives Indicates the number of standalone tape drives that have been
created.
• VLS Serial Number Identifies the serial number of the appliance.
Configuration tab
Create Virtual Device
Use this page to create a virtual library or virtual standalone tape.
Virtual D evice Information
Select the applicable option, Virtual Library or Virtual Standalone Tape Device.
NOTE:
The option yo
u
select changes which features are displayed on the remainder of this page and what
their defaul
ts
are.
iSCSI Host Settings
• iSCSI Name In the text box, type the iSCSI name of the host system that is allowed to access
this
library or device.
• iSCSI IP Enforcement (optional) If you want to use an a dditional level of authentication, use dotted
decimal notation to enter the IP address of the host system in this field.
Device Details
The options that are available in the following list depend on whether you are creating a library or tape.
• Tape Compression If your backup software supports a hardware compression feature for use with
tape, you can use this option to emulate that feature. For op tim al backup performance, leave this
check box cleared; to maximize the backup storage capacity, select this check box.
• Max Cartridge Size Enter the maximum size that you want to allow the device to r each. The default
value is 200 GB. Set the maximum size to the physical capacity in order to grow to full capacity.
• Device Type Select theapplicabletype. (There maybeonlyone type available.)
• Drive Count Enter the number of virtual tape drives that you want to allocate for the virtual library.
• Cartridge Count Enter the number of virtual cartridges (and corresponding slots) that you want
to
allocate for the virtual library. The GUI automatically creates a virtual tape-device for each
cartridge.
• Bar Code Seed To let the GUI specify the first bar code lab el and automatically generate
subsequent labels, leave the Automatic check box selected. To enter the first label manually,
clear the check box, and type the name in the text box that appears (you can enter up to six
alphanumeric characters).
IMPORTANT:
After you submit this page by clicking Create, you can only increase the number of cartridges and slots
assigned to the virtual library.
View/
Edit Virtual Library
Use th
is page
to view the amount of space currently consumed by the data stored in the virtual libraries;
view t
he
number of existing virtual libraries, cartridges, and drives; modify information for an existing
virtual library; or remove a virtual library.
66 VLS1000i GUI