Owner's manual

NOTE:
You can only increase the size or number of drives and slots; you cannot decrease them.
Target Settings
• Device Nam e Displays the name of the device automatically assigned by the GUI.
• Target Name To change the default target name of a device, type the new name in this field. (All
targets must have an iSCSI nam e.)
• LUN The Logical Unit Number assigned by the appliance to each created device.
• SCSI SN Displays the Small Computer System Interface (SCSI) serial number (SN) automatically
assigned to the device by the GUI.
Edit Host Configuration
Use this page to update information for the selected initiator.
• Connection Type Indicates that the connection type is iSCSI. You cannot modify this setting.
• Host Name If you have existing initiators and want to use one of them, select it from this pick list.
• iSCSI Host Nam e Enter the new name (you can enter up to 223 alphanumeric characters) for
the
authorized initiator. The fully qualified name is assigned by the manufacturer of either the
software initiator or storage adapter that you are using. The name that you enter here must match
the
name of the initiator on the associated system. To assign an existing host name, highlight the
current host name then select the new initiator name from the pick list.
• iSCSI IP Address If you want to use an additional level of authentication, use dotted decimal
notation to enter the IP address of the initiating system.
Virtual Library Status
Use this page to view a list of the devices, slots, and drives assigned to this virtual library (VL), and
information about each.
Device Summar y
• Description Lists the data-transfer elements, such as changers and tape drives, assigned to the VL.
• Device Name Displays thenameofthe target (device).
• Serial Number Displays the SCSI serial number automatically assigned to the target by the GUI.
Cartridge Map
• Element Indicates whether the slot is used as a bin for a virtual tape-cartridge or contains
a
virtual drive.
• Media Type Identifies which type of media is emulated, for example, LTO -2 tape devices.
• Bar Code Label Lists the label assigned to the elem ent b ased on the labeling scheme used by the
VL or
reports Empty if there is no label assigned.
• Used Capacity Displays how much space (in gigabytes) is currently consumed by the virtual tape.
View/Edit Virtual Standalone Tape
Use this page to view a list of the existing standalone devices, to access the page where you can change
the
attributes of a device (click Modify), or to remove a device (click Del ete).
• Device ID Indicates the ID automatically assigned to the device by the system or by the user.
• Device Nam e Indicates the n am e automatically assigned to the device by the system.
• Device Status Indicates the current state of the device.
• Size (GB) Indicates the amount of space currently being used by the device.
68 VLS1000i GUI