Owner's manual

Figure 62 Sliding on rea r top cover
2. Secure the cover with one screw.
Figure 63 Tightenreartop coverscrew
Front top cover
NOTE:
The rear to
pcover must be removedbeforethe fronttop covercan be removed. See Rear top cover.
CAUTION:
Remove power to the server by disconnecting the power cord before removing or installing the chassis
top covers.
To remove the front top cover:
1. Loosen the four screws along the top edg e and the two screws on both sides of the cover.
HP StorageWorks 1000i Virtual Library System
85