Owner's manual

Figure 67 Tighten front top cover screws

Backplane batter y

CAUTION:

Remove powe

to the server by disconnecting the power cord before removing or installing the backplane

battery.

Refer to Figure 68 for the location of the bat tery on the backplane.

Figure 68 Bac k p lane bat tery lo cation

To remove the backplane battery:

1. Remove the rear top cover (see Rear top cover).

2. Pull the battery retaining clip away from the battery (1).

Figure 69 Removing backp lane ba t ter y

3. Lift thebattery on thelever side andpullitout of theholder(2).

To install the backplane battery:

Component replacement