Owner's manual

Figure 84 Removing contro ller card from rise r card assembly

4. Reverse the steps to install a new RAID controller ca rd.

DVD-ROM drive

CAUTION:

Remove power to the server by disconnecting the power cord before removing or installing a RAID

controller

card and riser assembly.

To remove the DVD-ROM drive:

1. Remove the top front cover (see Front top cover)

2. Remove the two screws securing the DVD-ROM.

Figure 85 Removed DVD-ROM screws

3. Lift the DVD-ROM out of the VLS.

Figure 86 Lifting the DVD-ROM out of the VLS

4. Remove the two screws and then the connector plate from the DVD-ROM.

Figure 87 Removing t h e DVD-ROM connector plate

5. Reverse the steps to install a new DVD-ROM drive.

HP StorageWorks 1000i Virtual Library System