Instruction Manual

Fabric View
–89Web Tools Version 3.0.x/4.0.x User Guide 3–89
QuickLoop
Use the QuickLoop tab to create and manage QuickLoops if used in conjunction with
Zoning. For information on managing the QuickLoop feature separately, see “Loop
Tab” on page 5–20.
NOTE: This feature can only be used with 2x and 3x series switches.
The QuickLoop tab is shown in Figure 3–37.
Figure 3–37: QuickLoop tab of the WWN Level Zoning menu
Table 3–33 a description of the fields on the QuickLoop tab.
Table 3–33: QuickLoop Tab Fields
QuickLoop Name Select an existing QuickLoop member to modify.
Create Qloop Click to create a new QuickLoop member.