Instruction Manual

Fabric View
–95Web Tools Version 3.0.x/4.0.x User Guide 3–95
Table 3–35 provides a description of the fields on the WWN Config tab.
Table 3–35: WWN Config Tab Fields
Cfg Name Select to modify an existing WWN configuration
name to be modified.
Create Cfg Click to create a new WWN configuration.
Delete Cfg Click to delete a WWN configuration.
Rename Cfg Click to rename a WWN configuration.
Zone/QLoop Selection List This field displays a list of Zones, QuickLoop, and
alias members available to add to the WWN
configuration.
[Config] Members This field displays a list of the members that
belong to the WWN Configuration currently
selected in the Cfg Name field. The name of this
list depends on the name of the WWN
configuration selected. If WWN configuration is
not available, the name displays as “null
Members.”
< Search Mem Click to search for an alias, zone, QuickLoop, or
FA Zones in the Zone Selection List based on the
type of objects displayed in that list.
Add Mem > Click to add a member from the [Config Members]
list into the zone selection list.
< Remove Mem Click to remove a member from the zone selection
list into the [Zone/QLoop Selection] list.
Analyze Config Click to analyze the configuration that is selected
along with its member zones and aliases. A zoning
error screen (see Figure 3–34) appears in the
event of a conflict.
Refresh Fabric Click to refresh the fabric view with the latest
Domain/Port and WWN changes.
Enable Config If this option is checked, and the Apply button
pressed, the selected configuration would be used
for zoning the fabric.
Disable Zoning Click to disable zoning.
Save Config Click to save a zoning configuration without
enabling or disabling zoning.