Instruction Manual

Fabric View
3–118 Web Tools Version 3.0.x/4.0.x User Guide
Table 3–44 provides a description of the fields on the Config tab.
Table 3–44: Config Tab Fields
Cfg Name Select the existing Cfg name to be modified.
Create Cfg Click to create a new configuration.
Delete Cfg Click to delete a configuration.
Rename Cfg Click to rename a configuration.
Zone/QLoop/FA Zone
Selection List
A list of Zone/QuickLoop members available to add
to the configuration.
[Config] Members A list of the members that belong to the
Configuration currently selected in the Cfg Name
field. The name of this list depends on the name of
the configuration selected. If a configuration is not
selected, the name displays as “Null Members.”
< Search Mem Click to search for a switch name, WWN, alias,
zone, QLoop, or FA Zone in the Member Selection
List based on the type of objects displayed in that
list.
Add Mem > Click to add a member from the Zone Selection list
into the Config Member list.
< Remove Mem Click to remove a member from the Config
Members list into the Zone Selection list.
Analyze Config Click to analyze the configuration that is selected
along with its member zones and aliases, and come
up with a zoning error screen (see Figure 3-13) in
the event of a conflict.
Refresh Fabric Click to refresh the fabric view with the latest
Domain/Port and WWN changes.
Enable Config If this option is checked, and the Apply button
pressed, the selected config would be used for
zoning the fabric.
Disable Zoning Select this option and press the Apply button to
disable the selected zoning configuration.
Save Config Select to save the configuration without enabling or
disabling.