Instruction Manual

Switch View
4–42 Web Tools Version 3.0.x/4.0.x User Guide
To choose the port that you want to graph:
1. Double-click on the folder in the Port Selection List window.
A drop-down list of ports appears.
2. Select the port that you want to monitor or change by using one of the following
methods:
• Type the port number in the Enter /Drag Port Numbers window.
• Drag the port “file” from the Port Selection window to the Enter/Drag Port
Number window.
NOTE: For 4.0.x, it is required that the slot/port combination is entered.
3. Select OK.
A graph displaying the CRC errors for the chosen port will be displayed.
An example of a Port Error Graph, displaying a line of CRC errors for a given port, is
shown in Figure 4–32.
Figure 4–32: Port Error graph example