Instruction Manual

Switch View
4–55Web Tools Version 3.0.x/4.0.x User Guide 4–55
• Type the SID number in the Enter /drag SID Numbers window. Repeat for the
DID number.
• Type the SID number and select Add SID. Repeat for DID.
• Drag the SID “file” from the Slot/Port Selection window to the Enter/drag
SID Number window. Repeat for the DID number.
5. Select OK.
A graph displaying the CRC errors for the chosen port will be displayed.
An example of an SID/DID graph, displaying the traffic between an SID and a DID
pair, is shown in Figure 4–43.
Figure 4–43: SID/DID Performance graph example
SCSI Commands Graph
When you select the SCSI graph, the following options are displayed in a pull-down
menu:
• SCSI Read/Write on a LUN per port
• SCSI Read on a LUN per port
• SCSI Write on a LUN per port
• SCSI Read/Write per port