Instruction Manual

Switch View
–71Web Tools Version 3.0.x/4.0.x User Guide 4–71
SNMP Tab
Use the SNMP tab for administration of the SNMP subsystem. From the SNMP tab
you can specify the switch community string, location, trap level and trap recipients.
The SNMP tab is shown in Figure 4–53.
NOTE: In order for the switches to send SNMP traps, you must first enter the Telnet command
snmpMibCapSet. This enables the MIBs on all switches to be monitored.
Figure 4–53: SNMP tab