Instruction Manual

Switch View
4–82 Web Tools Version 3.0.x/4.0.x User Guide
rstatd Check box to dynamically enable a server that returns
information about system operation information through
remote procedure calls (RPC). Uncheck box to disable
rstatd.
rapid Check box to enable rapid system service.
rusersd Dynamically enables or disables a server that returns
information about the user who is logged into the system
through remote procedure calls.
RLS Probing Check to enable RLS Probing services of AL_PAs.
OK Click to save the changes made to the tab and to exit the
tab.
Apply Click to save the changes made to this tab and to stay in
the current tab. Additional changes can be made and the
Apply button pressed when making changes incrementally.
Close Click to exit the current tab. If changes have been made
but not committed by clicking the Apply button, a dialog
box displays.
Reset Click to reset the tab to the last set of committed changes.
If the Apply button has not been pressed on this tab, the
parameters are returned to the original values the tab had
when it was initially displayed.
Table 4–23: Configure Tab Fields (Continued)