Instruction Manual

Switch View
–99Web Tools Version 3.0.x/4.0.x User Guide 4–99
Table 4–29 provides a description of the fields on the Network Configuration tab.
Table 4–29: Network Configuration Tab Fields
Ethernet IP Displays the Ethernet IP address.
Ethernet
SubnetMask
Displays the Ethernet SubnetMask address.
Gateway IP Displays the Gateway IP address.
Fibre Channel IP Displays the Fibre Channel IP address.
Advanced Click to view pop-up window. Displays Network Element
(CP) and associated IP address. Allows for configuration of
chassis IP address and subnet masks (for both CP0 and
CP1).
Syslog IPs Displays the Syslog IP address for a user to configure.
Current Value Displays the current value of the Syslog IP.
Syslog IP field Enter a Syslog IP address to be added, removed, or cleared
from the display. The Syslog IP represents the IP address of
the server that is running the syslogd process. Syslog
daemon reads and forwards system messages to the
appropriate log files and/or users, depending on the system
configuration. When one or more IP addresses are
configured, the switch forwards all error log entries to the
syslogd on the specified server(s). Up to six servers are
supported.
Add Select to add a Syslog IP address.
Remove Select to remove a Syslog IP address.
Clear All Select to remove Syslog IPs from the display list.
Ok Select to save the changes made to the tab and to exit the
view.
Apply Select to save the changes made to this tab and to stay in
the current tab. Additional changes can be made and the
Apply button pressed when making changes incrementally.
Close Select to exit the current view.
Reset Select to reset the tab to the last set of committed changes.
If the Apply button has not been pressed on this tab, the
parameters are returned to the original values the tab had
when it was initially displayed.