Instruction Manual

Switch View
–121Web Tools Version 3.0.x/4.0.x User Guide 4–121
Table 4–39 provides a description of the fields on the Routing tab.
Table 4–39: Routing Tab Fields
Dynamic Load
Sharing (DLS)
Click the radio button to turn Dynamic Load Sharing on or
off.
In-Order Delivery
(IOD)
Click the radio button to turn In-Order Delivery on or off.
Port Number Displays Port Number.
Cost Use the Cost field to change the link cost for a particular
port.
In Port Displays In Port number.
Destination
Domain
Displays the destination domain ID for the
“comma-separated” participating static routes for a
particular in port. The destination domain IDs match the out
ports in the cell.
Out Port Enter the out port. It should be within the range of ports that
are available for static routes for the current domain. More
than one out port can be used for any In port with a
different domain ID. Each domain ID requires an out port.
Slot Number tabs Click to view a specific slot. Available only when viewing an
StorageWorks Core switch series switch.
OK Click to save the changes made to the tab and to exit the
tab.
Apply Click to save the changes made to this tab and to stay in
the current tab. Additional changes can be made and the
Apply button pressed when making changes incrementally.
Close Click to exit the current tab. If changes have been made but
not committed by clicking the Apply button, a dialog box
displays.
Reset Click to reset the tab to the last set of committed changes.
If the Apply button has not been pressed on this tab, the
parameters are returned to the original values the tab had
when it was initially displayed.
Refresh Click to view the most current information available from the
switch.