Instruction Manual

Switch View
4–124 Web Tools Version 3.0.x/4.0.x User Guide
Table 4–40 provides a description of the fields on the Remote Switch tab.
Table 4–40: Remote Switch Tab Fields
Remote Switch Status Section:
Enabled Click on box to enable the Remote Switch feature.
Disabled Click on box to disable the Remote Switch feature.
OK Click to save the changes made to the tab and to exit the
tab.
Apply Click to save the changes made to this tab and to stay in
the current tab. Additional changes can be made and the
Apply button pressed when making changes incrementally.
Close Click to exit the current tab. If changes have been made but
not committed by clicking the Apply button, a dialog box
displays.
Reset Click to reset the tab to the last set of committed changes.
If the Apply button has not been pressed on this tab, the
parameters are returned to the original values the tab had
when it was initially displayed.
Refresh Click to view the most current Remote Switch information.
Log Area Displays coded messages:
• Successful changes to settings are logged in italics.
• Error messages are indicated in red.
• Warning messages are indicated in orange.
• Additional information is indicated in magenta.
QuickHelp Status
bar
Displays a one-line description about entry fields or a tool
tip on any modifiable component. A green icon indicates
that a switch is enabled; a red icon is displayed when the
switch is disabled using the Admin tool.