Instruction Manual

Port View
5–18 Web Tools Version 3.0.x/4.0.x User Guide
Table 5–6 provides a description of the fields on the SFP tab.
Table 5–6: SFP Tab Fields
Identifier Indicates the type of serial transceiver, which can be SFP
or on-board.
Connector Indicates the external connector type, which will be the
following:
•SC
ID Name Indicates the SFP module type:
-- - No SFP present
sw - Short wave SFP
lw - Long wave SFP
cu - Copper SFP
swid - Short wave serial ID SFP
lwid - Short wave serial ID SFP
cuid - Short wave serial ID SFP
SFP Speed Indicates the SFP speed, which can be 100, 200, or 400
MB/sec.
SFP Media Indicates the transmission media, which can be:
SM - single mode
M5 - multi-mode, 50u
M6 - multi-mode, 62.5u
TV - video coax
MI - miniature coax
TP - shielded twisted pair
TW - twin axial pair
SFP Distance Indicates the length of the Fibre Channel link, which can
be long distance, intermediate distance, or short distance.
Encoding Indicates the serial encoding mechanism, which can be
8B10B, 4B5B, NRZ, or Manchester.
Baud Rate Indicates the nominal baud rate in units of 100 Megabyte.
BR Max Indicates the upper limit at which SFP meets its
specifications (in units of 1 percent above nominal baud
rate).