Instruction Manual

Fabric View
3–37Web Tools Version 3.0.x/4.0.x User Guide 3–37
Table 3–13 gives descriptions of the fields on the WWN Zone tab.
Table 3–13: WWN Zone Tab Fields
Zone Name Select an existing zone member to modify.
Create Zone Click to create a new zone member.
Delete Zone Click to delete a zone member.
Rename
Zone
Click to rename a zone member.
Member
Selection
List
This field displays a list of potential zone members, including
switches, ports, WWNs, and QuickLoop AL_PAs, and Fabric
Assists.
Zone
Members
This field lists the zone members selected in the Zone Name field.
The name on this list depends on the name of the selected zone
member. If a name is not selected, the name displays as “null
Members.”
Search Mem Click to search for a switch name, WWN, alias, zone, or QuickLoop
in the Member Selection List based on the type of objects
displayed in that list.
Add Mem Click to add a member from the Member Selection list into the
Zone Member contents.
Remove
Mem
Click to remove a member from the Zone Member list.
Add WWN Click to add a WWN that is not currently part of the Fabric.
Ref Zone Click to refresh the local zoning database copied from the switch.
This button automatically flashes red/gray if the fabric zoning data
is changed by another client.
A/D WWN Click to add or delete a WWN to or from all the aliases and zones
defined
Rpl WWN Click to replace a WWN with another one in all aliases and zones
defined.
OK Click to apply the changes to the switch and exit the switch.
Apply Click to apply the changes to the switch.
Close Click to exit the window without making any changes to the switch.
Clr All Select to clear the zoning database, disable the effective
configuration (if there is one), and then commit to the switch.