Instruction Manual

Fabric View
3–42 Web Tools Version 3.0.x/4.0.x User Guide
Ref Zone Click to refresh the local zoning database copy
from the switch. This button would automatically
flash red/gray if the fabric zoning data is changed
by another client.
Add WWN Click to add a WWN that is not currently part of the
Fabric.
Add WWN Host Click to add a WWN Host that is not currently part
of the Fabric.
A/D WWN Click to add/delete a WWN to/from all the aliases,
zones, and FA zones defined.
Rpl WWN Click to replace a WWN with another one in all
aliases, zones, and FA zones defined.
OK Select OK to the changes to the switch and exit
the window.
Apply Click to apply all changes made including changes
made on other tabs in the view. Changes cannot
be cancelled once they are applied.
Close Click to exit the window without making any
changes to the switch.
Clr All Select to clear the zoning database, disable the
effective configuration (if there is one), and then
commit to the switch.
Table 3–15: WWN Fabric Assist Tab Fields (Continued)