Instruction Manual

Fabric View
3–52 Web Tools Version 3.0.x/4.0.x User Guide
Table 3–19 gives descriptions of the fields on the QuickLoop tab.
Table 3–19: QuickLoop Tab Fields
QuickLoop Name Select an existing QuickLoop member name to modify.
Create Qloop Click to create a new QuickLoop member.
Delete Qloop Click to delete a QuickLoop member.
Rename Qloop Click to rename a QuickLoop member.
Switch Selection List This field displays a list of potential QuickLoop members,
including switches, ports, WWNs, and QuickLoop
AL_PAs, and Fabric Assists.
QuickLoop Members This field displays a list of the zone members selected in
the QuickLoop Name field. The name on this list depends
on the name of the selected QuickLoop member. If a
name is not selected, the name displays as “null
Members.”
Search Mem Click to search for a switch name, WWN, alias, zone, or
QuickLoop in the Member Selection List based on the
type of objects displayed in that list.
Add Mem Click to add a member from the member selection list
into the QuickLoop member contents.
Remove Mem Click to remove a member from the QuickLoop Members
list when selected.
Ref Zone Click to refresh the local zoning database copied from the
switch. This button automatically flashes red/gray if the
fabric zoning data is changed by another client.
A/D WWN Click to add or delete a WWN to or from all the aliases
and zones defined.
Rpl WWN Click to replace a WWN with another one in all aliases
and zones defined.
OK Click to apply the changes to the switch and exit the
switch.
Apply Click to apply the changes to the switch.
Close Click to exit the window without making any changes to
the switch.