Instruction Manual

Fabric View
3–55Web Tools Version 3.0.x/4.0.x User Guide 3–55
Mixed Level Zoning
Mixed Level Zoning is provided for backward compatibility of pre-3.0.x zones. After
selecting the Mixed Level Zoning button from the Zoning Selection window and
clicking OK, the Mixed Level Zoning window with the Alias tab is displayed as
shown in Figure 3–24.
Following is a list of the tabs provided in the Mixed Level Zoning menu:
• Alias
•Zone
•QuickLoop
• Fabric Assist
•Config
Ref Zone Click to refresh the local zoning database copied
from the switch. This button automatically flashes
red/gray if the fabric zoning data is changed by
another client.
A/D WWN Click to add or delete a WWN to or from all the
aliases and zones defined.
Rpl WWN Click to replace a WWN with another one in all
aliases and zones defined.
OK Applies the changes to the switch and exits the
switch.
Apply Click to apply all changes made including changes
made on other tabs in the view. Changes cannot
be cancelled once they are applied.
Close Click to exit the window without making any
changes to the switch.
Clr All Select to clear the zoning database, disable the
effective configuration (if there is one), and then
commit to the switch.
Table 3–20: AL_PA Device Config Tab Fields (Continued)