Owner's manual

Advanced Performance Monitoring User’s Guide 3-11

Using Advanced Performance Monitoring

Example 2. The following command displays the cumulative frame count of all filter-based

monitors defined on port 2. The KEY column lists the monitor numbers.

Deleting Filter-Based Monitors

To delete a filter-based monitor, first list the valid monitor numbers using the

perfShowFilterMonitor command, then use the perfDelFilterMonitor command to delete a

specific monitor.

Note: If you do not specify a monitor number, then all filter monitors on the port are deleted.

Example. The following commands display the monitors on port 4 (the monitor numbers are listed

in the KEY column), and then delete monitor number 1 on port 4.

sw1:admin> perfShowFilterMonitor 2, 1

0123456

#CMDs #CMDs #CMDs #Frames #Frames #Frames #CMDs

-------------------------------------------------------------

0 000000

26k 187 681 682 682 494 187

26k 177 711 710 710 534 176

26k 184 734 734 734 550 184

26k 182 649 649 649 467 182

26k 188 754 755 755 567 184

sw1:admin> perfShowFilterMonitor 2

There are 7 filter-based monitors defined on port 2.

KEY ALIAS OWNER_APP OWNER_IP_ADDR FRAME_COUNT

----------------------------------------------------------------

0 SCSI_RD TELNET N/A 0x0000000000002208

1 SCSI_WR TELNET N/A 0x000000000000464a

2 SCSI_RW TELNET N/A 0x000000000000fd8c

3 SCSI_Frame WEB_TOOLS 192.168.169.40 0x00000000002c2229

4 IP_Frame WEB_TOOLS 192.168.169.40 0x0000000000000492

5 FCP/IP WEB_TOOLS 192.168.169.40 0x0000000000000009

6 SCSI_RD WEB_TOOLS 192.168.161.140 0x000000000000023a

sw1:admin> perfShowFilterMonitor 4

There are 4 filter-based monitors defined on port 4.