Owner manual
Table Of Contents
- DAT SAS Tape Drives
- Table of Contents
- About this guide
- 1 Before you start
- 2 Drivers and backup software
- 3 Installing an internal DAT tape drive
- 4 Installing an external SAS tape drive
- 5 Verify installation
- 6 Operating your tape drive
- 7 Use the correct media
- 8 Using HP OBDR
- 9 Diagnostic Tools and Performance
- 10 Troubleshooting
- 11 Replacing an internal tape drive
- A Connecting an external tape drive to an internal SAS port
- Index
Problems with cartridges ............................................................................................................ 66
The cartridge is jammed ...................................................................................................... 67
The drive will not accept the cartridge (or ejects it immediately) ................................................ 67
11 Replacing an internal tape drive ....................................................... 69
To disconnect your drive ............................................................................................................ 69
To reconnect your tape drive ...................................................................................................... 69
A Connecting an external tape drive to an internal SAS port ..................... 71
Before you start ........................................................................................................................ 71
PCI slots ............................................................................................................................ 72
Remove server cover ................................................................................................................ 72
Connect SAS cable to internal SAS port ....................................................................................... 72
Server has spare SAS port: Connect cable to spare port on host SAS controller or host HBA ........ 72
Server does not have spare SAS port: Connect cable to port on host SAS controller and replace
existing SAS cable .............................................................................................................. 75
Reboot the server ...................................................................................................................... 79
Index ................................................................................................. 81
DAT SAS Tape Drives 5